Semi-auto Pre-feeding Machine
T-ONE Semi-auto pre-feeding machine prefeeder helps save manpower but not labor cost
Transition belts of the feeding machine can be controlled by photoelectric switch of printer and adjust the speed with inverter .Automatic vertical flapper device is applied to the belts for the semi-auto pre-feeder
Vertical movement for the corrugated pre-feeder machine
The paperboard pre-feeder machine feeding rollers are fixed on the ground.
- Other
- Foshan,China
- Information
- Video
Semi-auto Pre-feeding Machine 2400Model
1. Main specifications
| Stacking height | 1800 mm |
| Max.stacking weight | 2000 Kg |
| Max.size of sheet | 1200mm×2400mm |
| Min.size of sheet | As required |
| Max.speed | 300pcs/min |
| Lifting of sheets | Chain with fork |
| Turning of fork | Hydraulic |
| Lifting power | Hydraulic |
2. Main description
* Side stopper on drive side with motorized telescopic function.
* All-in-one flapper plate.
* Automatic vertical flapper device is applied to the belts.
* Vertical movement of whole machine.
* Feeding rollers fixed on the ground.
* Sheets are pushed forward after turned over by the fork.
* Transition belts can be controlled by photoelectric switch of printer and adjust the speed with inverter.
* Chains lifting controlled by proximity switch.
* Operational platform with locker for storage.
* Semi prefeeder help save manpower but not labor cost.
3. Technical figures:
* Equipped with three 6M Φ60×215 powerless roller logistic
* Equipped with two 6M Φ60×165 powerless roller logistic
* Equipped with operational platform
Factory Show
There are several solutions: 1. Check the air pressure, the air pipe of the arm lock cylinder should not leak air, and all the air pipes should not leak air. 2. Adjust the pressure and position of the impression roller. 3. Adjust the parallelism of the impression roller and the printing cylinder. 4. Tighten the ratchets at both ends of the printing plate to make the printing plate tensioned....more
